It’s that time of year again when you start noticing your heating system isn’t working as well as it should. There are many options for getting your heating back up and running quickly.
In this article, we’ll talk about the steps you should take when it happens, the benefits of hiring a licensed contractor, and the risks that come with the DIY heating repair.
Did your heating system stop working suddenly? We know how frustrating this can be. You should do a few things before jumping to any conclusion that it’s too late to fix the problem. These steps may seem obvious, but they are often overlooked.
Check your thermostat.
If it isn’t set correctly or has accidentally been turned off, this could cause your heating system to stop running. Is your home at its limit for how warm it can get? No matter what temperature you set the thermostat to, it will not allow itself to operate until you lower the maximum allowed warmth for that area.
Check your outlets.
Make sure the problem isn’t a result of burnt-out bulbs or bad outlets, and if you have anything else plugged in when it begins to malfunction, try unplugging them all. Sometimes your problem may be as simple as one of these items drawing too much power from your system or draining some energy vital for its function.
Look for fuses and circuit breakers.
These are beneficial devices unless they’re defective themselves! So if your heating system stops working when turning on another appliance in the same room, look to see if there’s a breaker or fuse that needs replacing.
You can do this by checking with any family member who would know better about which ones are which. You can also go to the circuit breaker box and start by turning off each breaker one by one. Calling your local expert is also a good idea because they’ll know how to diagnose the problem.
Check your heating system’s fuse.
This will be in the heating system itself, often behind a panel or the central unit. You mustn’t touch anything until you disconnect power from your heating system. Look around for the fuse to see if it’s broken, burnt out, or needs replacing altogether.
This step is recommended because many people who think their heating systems are broken only have this issue! However, remember that sometimes fuses can be challenging to find- or expensive to replace- so calling a professional might still be your best bet.
Turn it off and call an expert immediately.
If you’ve tried all of these, and your heating system still isn’t working correctly, it may be time to call a professional. Hiring an expert will ensure that your problem is diagnosed correctly as soon as possible and fixed quickly enough to avoid further damage or potential health hazards.
Plus, if the problem is something simple like a fuse or circuit breaker, they can replace those for you at a small fee rather than having to take apart your whole unit just for that.
No one wants to experience an uncomfortable day without a functioning heater. So your best option is to hire a licensed expert to handle your faulty heating system. Continue reading to know why.
Calling an expert for the job may seem expensive at first, but it’s a cost-savings for homeowners in the long run. A professional heating contractor has received extensive training to ensure they handle these systems without causing damage. Many of them have years of experience working with every type of furnace imaginable.
Here are some advantages of hiring an expert for heating repair service in Plano, TX:
They have the tools.
If your heating system is really old, it might be hard to find replacement parts for it anymore. A contractor will have access to industry-specific tools designed for these types of troubleshooting situations. They may even have a few parts on hand to replace if necessary.
This way, you can get back up and running right away without having to wait for an order! Let’s face it: no one wants their furnace fixed by four different people in one year!
They are licensed.
Hiring a professional ensures that the job gets done right the first time. Why risk calling one contractor after another when you can have it done by one specific company with known experience in the field?
This will not only save you valuable time but also money in the end since there’s less of a chance that you’ll need to hire someone else for any further repairs down the road!
Additionally, if they’re licensed, then they are required to do things like test your gas system every year. It also includes replacing parts according to industry standards- all free of additional charge.
They have a warranty.
This is a bonus for homeowners who hire contractors because most skilled professionals offer warranties on their work. Yes, even HVAC technicians have warranties because they take pride in offering quality service.
This means you won’t have to pay for further repairs if anything else fails within the warranty period, typically one year for parts and labor combined.
They provide maintenance contracts.
If your house is old, then it might be a good idea to get an annual contract to avoid paying additional charges each time something breaks down. Yes, maintenance contracts are significant for your heating system and other appliances around your home!
These contracts allow contractors to track how often repairs are needed to catch potential problems early on before they become costly issues later on.
Everyone wants to save as much money as possible. But the fact of the matter is that you need to hire professionals for this kind of work, especially since it can be dangerous when done incorrectly.
Otherwise, you’re risking a lot by repairing by yourself. Here are the reasons why it’s not advisable to work on your heater by yourself:
You’re risking safety.
While some repairs may seem simple to you, that’s only because you don’t have the proper training. Yes, even an issue with your thermostat or ignition system can be dangerous when tampered with by someone who has no experience in this field!
If you’ve noticed that your pilot light is out, then it’s best if you contact a pro to check for leaks before lighting it again because faulty gas lines are known to cause explosions! Plus, something as simple as replacing air filters can also be harmful when not done correctly. Otherwise, you risk damaging the blower motor, which may lead to extensive problems later.
Doing repair yourself could cause further damage.
Another reason you should not do the DIY heating repair is that you could cause further damage to the system. For example, if your blower isn’t working correctly and you put in a new filter, it will overheat and burn out in no time.
Not only is this frustrating, but it’s also costly, which is why we recommend always calling professionals when in doubt.
It may void your warranty.
If you’re still under warranty, it may be wise to avoid DIY heating repair altogether for this reason! Most warranties don’t cover any damages that result from an improper installation of filters or thermostats since these are considered something that homeowners can do themselves at home.
Plus, anything related to gas lines may void your entire warranty, which is why it’s best always to call a pro when dealing with this system.
You’re cutting corners.
Finally, you should avoid DIY repairs because this can lead to cutting corners in regards to safety and how the system functions! For example, putting in a cheaper filter may save you money. It’s also draining your system of its heating power since they are made with materials that might break within a few months.
A new air filter may seem like a quick and easy fix. Still, we recommend hiring professionals who know what they’re doing instead of trying to save some money on an issue you don’t fully understand.
You don’t have the experience necessary to do it safely.
Yes, even simple tasks like checking filters or airflow can be dangerous when you’re not experienced in this field. If you don’t know how to do things safely, then there’s a chance that you might cause further damage to your system.
Along the way, you might cut corners as well since you want to avoid paying additional costs to buy new parts and pay for labor. For example, putting in the wrong type of filter may create an abundance of carbon monoxide, which is extremely harmful if inhaled by anyone living inside your home!
At Spencer Air Conditioning & Heating, our company is more than qualified to provide you with the heating repair service in Plano, TX that you deserve! We’ve been in the industry for decades, and we’re proud to offer our customers high-quality service at reasonable rates.
If you need expert HVAC repair, then there’s no company better than us to call on. For more information, call us today at 972-446-2665!